Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 49

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
reason: [hex].
Error Message
Error Message
during upgrade - [hex].
ACLTCAM-3
Error Message
- error [hex].
ACLTCAM-6
Error Message
OL-15956-01
ACLTCAM-2-ACL_TCAM_PSS_FAILURE: Failed to do PSS operation: [chars],
Failed to do a persistent storage service (PSS) operation because of the reason shown
Explanation
in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
ACLTCAM-2-PSS_OPEN_FAILED: PSS open failed - [hex].
A persistent database handle could not be obtained for ACL TCAM. The error message
Explanation
shows the error code associated with this problem.
No action is required.
Recommended Action
Introduced Cisco MDS SAN-OS Release 1.2(2a).
ACLTCAM-2-RECONS_FAILED: Reconstruction of TCAM contents failed
During a nondisruptive upgrade, the ACL TCAM contents were not properly
Explanation
reconstructed. The error message shows the error code associated with this problem.
Recommended Action No action is required.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
ACLTCAM-3-REGISTER_FAILED: Could not register to MTS opcode [chars]
Explanation The ACLTCAM process could not register to the notifications shown in the error
message. The error message also shows the error code for this problem.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
ACLTCAM-6-ACL_TCAM_STATUS: Status: [chars].
Explanation This message reports the ACL TCAM status.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-13