Vfc-3; Vhbad Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message

VHBAD Messages

This section contains the virtual host bus adapter daemon (VHBAD) messages.
VHBAD-2
Error Message
target driver error: [hex].
Error Message
target driver error: [hex].
Error Message
target driver error: [hex].
Cisco MDS 9000 Family System Messages Reference
2-430
VFC-6-STARTING: deamon started.
The virtual Fibre Channel (VFC) daemon successfully started.
Explanation
Recommended Action No action is required.
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
VHBAD-2-PROC_ADD_NPORT_FAIL: Failed to set local nport with SCSI
Explanation SCSI target process tried to add N port with its peer kernel driver. No SCSI discovery
can be performed.
Enter the show SCSI target internal driver CLI command or use a similar
Recommended Action
Fabric Manager/Device Manager procedure to collect more information.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
VHBAD-2-PROC_OPEN_VHBA_DEVICE_FAIL: Failed to communicate with SCSI
SCSI target process failed to communicate with its peer kernel driver. No SCSI
Explanation
discovery can be performed.
Recommended Action Enter the show SCSI target internal driver CLI command or use a similar
Fabric Manager/Device Manager procedure to collect more information.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
VHBAD-2-PROC_SET_SCSI_INDEX_FAIL: Failed to set SCSI index SCSI
SCSI target process failed to set SCSI index with its peer kernel driver. No SCSI
Explanation
discovery can be performed.
Enter the show SCSI target internal driver CLI command or use a similar
Recommended Action
Fabric Manager/Device Manager procedure to collect more information.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01