Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 111

Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
Table of Contents

Advertisement

Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
failed.
Error Message
Error Message
Service failed.
Error Message FCDOMAIN-2-MY_NON_VIRTUAL_DOM_CONFLICTS: During VSAN merge detected
that the local switch has the same domain ID [dec] and WWN [chars] of another
switch.
OL-15956-01
FCDOMAIN-2-INITIALIZATION_FAILED: Initialization sequence failed.
The domain manager has not been able to complete the initialization sequence. The
Explanation
domain manager depends on resources not available at the moment. The switch might be short in
memory or some other component might be unable to provide the necessary information to the
domain manager.
Recommended Action
No action is required.
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
FCDOMAIN-2-MTS_INITIALIZATION_FAILED: IPC initialization sequence
The domain manager has not been able to complete the initialization sequence with the
Explanation
interprocess communication (IPC) subsystem. The domain manager depends on resources not
available at the moment. The switch might be short in memory or some other component might be
unable to provide the necessary information to the domain manager.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
FCDOMAIN-2-MTSBIND_FAILED: Bind to IPC failed.
The domain manager has not been able to contact the inter-process communication
Explanation
(IPC) module.
No action is required.
Recommended Action
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
FCDOMAIN-2-MTSREGISTRATION_FAILED: Registration of opcodes with IPC
The domain manager has not been able to register its messages with the inter-process
Explanation
communication (IPC) module.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
The local switch has the same domain ID and WWN of another switch.
Explanation
Check which switches have the same WWN and change one to a unique WWN.
Recommended Action
Then change the domain ID for one of the switches.
Cisco MDS SAN-OS Release 3.0(1).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-75

Advertisement

Table of Contents
loading

Table of Contents