Xbar Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

XBAR Messages

This section contains the crossbar (XBAR) messages.
XBAR-3
Error Message
XBAR-5
Error Message XBAR-5-ARB_INIT_MOD_INTR_FAIL: Arbiter reported failure to enable
interrupt for module [dec] return_code [hex] ([chars]).
Error Message
module [dec] return_code [hex] ([chars]).
Error Message
[dec] in group [dec] return_code [hex] ([chars]).
Error Message XBAR-5-ARBITER_INIT_FAILURE: Re-initializing Arbiter.
OL-15956-01
XBAR-3-MEM_FULL: Memory allocation failed.
Memory allocation failed.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
The supervisor has experienced an arbiter setup failure.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
XBAR-5-ARB_INIT_MOD_REMOVE_FAIL: Arbiter reported failure to remove
The supervisor has experienced an arbiter setup failure.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
XBAR-5-ARB_INIT_PORT_FAIL: Arbiter reported failure to register port
The supervisor has experienced an arbiter setup failure.
Explanation
No action is required.
Recommended Action
Introduced Cisco MDS SAN-OS Release 3.0(1).
The supervisor module has experienced an arbiter setup failure.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Cisco MDS 9000 Family System Messages Reference
2-459