Scsi Target-2 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
[hex].
SCSI target-3
Error Message
RATOV from VSAN Manager, error: [hex].
Error Message
to error: [hex].
Error Message
failed due to error: [hex].
OL-15956-01
SCSI target-2-PSS_INIT_FAIL: pss initialization failed due to error:
SCSI target process persistent storage service (PSS) initialization failed due to the error
Explanation
listed. No SCSI discovery can be performed.
Recommended Action
Enter the show flash command or use a similar Fabric Manager/Device
manager procedure to collect more information. See PSS system error codes for the reason.
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
SCSI target-3-PROC_VSAN_GET_RATOV_FAIL: Failed to get vsan attribute
SCSI target process used the vsan_get_global_value() API for RATOV and it failed
Explanation
because of the error listed.
This is a non-fatal error. The default value for RATOV is used. Enter the show
Recommended Action
process cpu and show system internal sysmgr service all commands or use a similar Fabric
Manager/Device Manager procedure to collect more information. See the VSAN Manager system
error codes for the reason.
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
SCSI target-3-PSS_CREATE_FAIL: pss create runtime database failed due
SCSI target process persistent storage service (PSS) had a create runtime database
Explanation
failure because of the error listed. No SCSI discovery can be performed.
Recommended Action
Enter the show flash command or use a similar Fabric Manager/Device
Manager procedure to collect more information. See PSS system error codes for the reason.
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
SCSI target-3-PSS_DELETE_FAIL: pss delete runtime entry key:[hex]
SCSI target process persistent storage service (PSS) delete runtime entry key failed
Explanation
because of the error shown in the error message.
Enter the show flash command or use a similar Fabric Manager/Device
Recommended Action
Manager procedure to collect more information. See PSS system error codes for the reason.
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-297
Advertisement
Table of Contents
