Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 143
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
FDMI-2
Error Message
Error Message
failed with error [hex] for key type [dec].
Error Message
[chars] failed with error [hex].
FDMI-3
Error Message
Error Message
OL-15956-01
FDMI-2-MTS_ERROR: MTS message transmission failed with error [dec].
The Fabric-Device Management Interface (FDMI) process unsuccessfully tried to send
Explanation
a messaging and transaction service (MTS) message. MTS error number is specified in the error
message.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FDMI-2-PSS_CFG_RESTORE_ERROR: Configuration restoration for [chars]
The Fabric-Device Management Interface (FDMI) read the saved configuration and
Explanation
encountered an error while rebuilding the runtime configuration. The error message describes the
configuration that the process tried to restore and the system error code.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
FDMI-2-PSS_RTDB_RESTORE_ERROR: Runtime database restoration for
The Fabric-Device Management Interface (FDMI) read the saved runtime database and
Explanation
encountered an error while rebuilding the runtime database. The error message describes the runtime
database that the process tried to restore and the system error code.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FDMI-3-BAD_FRAME: Malformed frame received: [chars].
Explanation
The Fabric-Device Management Interface (FDMI) process received malformed frame.
The error message describes the problem.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FDMI-3-BAD_RESPONSE: response with command code: [hex].
Explanation
The Fabric-Device Management Interface (FDMI) process received bad payload in
response.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-107
Advertisement
Table of Contents
