Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 417
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
time. The supervisor will be reset.
Error Message
to some internal error.
Error Message
to some internal error.
Error Message SYSMGR-3-DAEMONIZE_FAILED: Unable to daemonize service "[chars]":
[chars] ([dec]).
Error Message
failed (error-id [hex]).
OL-15956-01
SYSMGR-3-COPY_CORES_FAILED: Copying cores failed ([dec]).
Copying cores to the destination failed because of an error specified in the log.
Explanation
Recommended Action
No action is required.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SYSMGR-3-COREDUMP_TIMEOUT: Failed to store the core in the specified
Explanation
Failed to store a core dump in the specified time. The supervisor will be reset.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
SYSMGR-3-CORE_CLIENT_INIT_FAILED: Core client will not be started due
Core client will not be started because of some internal error.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SYSMGR-3-CORE_SERVER_INIT_FAILED: Core server will not be started due
Explanation
Core server will not be started because of some internal error.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
A service could not be started.
Explanation
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
SYSMGR-3-FAILED_PFM_HANDSHAKE: PFM-handshake from service "[chars]"
The platform manager handshake has failed. The system cannot proceed with the
Explanation
initialization.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-381
Advertisement
Table of Contents
