Fcc-2 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
FCC-5
Error Message
Error Message
notification to state: [dec].
Error Message
Error Message
Error Message
Error Message
Cisco MDS 9000 Family System Messages Reference
2-66
FCC-5-BAD_MSG: Received bad message: [chars].
The Fibre Channel Congestion Control process has received a malformed or
Explanation
unrecognized message.
No action is required.
Recommended Action
Introduced Cisco MDS SAN-OS Release 1.2(2a).
FCC-5-CONGESTION_STATE_CHANGE_NOTIF: Received Congestion State Change
The Fibre Channel Congestion Control process has received a congestion state change
Explanation
notification.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(4a).
FCC-5-DISABLE: FCC has been disabled.
The Fibre Channel Congestion Control process has been disabled.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FCC-5-ENABLE: FCC has been enabled.
Explanation The Fibre Channel Congestion Control process has been enabled.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FCC-5-RATE_LIMIT_END_NOTIF: Received Rate Limit End notification.
Explanation The Fibre Channel Congestion Control process has received a rate limit end
notification.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(4a).
Introduced
FCC-5-RATE_LIMIT_START_NOTIF: Received Rate Limit Start notification.
Explanation The Fibre Channel Congestion Control process has received a rate limit start
notification.
No action is required.
Recommended Action
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01