Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 395

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
purged[chars].
Error Message
SVC-7
Error Message
SVC_BATTERY Messages
This section contains the SAN Volume Controller battery (SVC_BATTERY) messages.
SVC_BATTERY-SLOT#-2
Error Message
temperature [dec] C is outside the operational range (-10C to 65C).
OL-15956-01
SVC-6-SVC_SYSLOG_CL_UNJOIN: Node [chars] has left cluster [chars].
SAN Volume Controller (SVC) interface has left cluster.
Explanation
Recommended Action No action is required.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-6-SVC_SYSLOG_LC_WWN_PURGE: All WWNs for module [dec] have been
Explanation SAN Volume Controller (SVC) line card has purged all WWNs.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-6-SVC_SYSLOG_VSAN_INACTIVE: VSAN [dec] suspended.
VSAN was suspended. This can cause other warnings.
Explanation
No action is required.
Recommended Action
Introduced Cisco MDS SAN-OS Release 1.3(1).
SVC-7-NODE_DEBUG_MSG: [chars].
Syslog message from a SAN Volume Controller (SVC) interface node.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC_BATTERY-SLOT#-2-BATTERY_NOT_OPERATIONAL: Battery [dec]
The battery temperature is outside the operational range (-10 to 65
Explanation
Enter the show environment fan CLI command or use an equivalent Fabric
Recommended Action
Manager/Device Manager procedure to determine fan operation and take action to cool down the
switch.
Cisco MDS SAN-OS Release 1.3(4a).
Introduced
Cisco MDS 9000 Family System Messages Reference
0
C).
2-359