Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 92

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
(Error disabled - Incompatible admin port speed).
Error Message
(Initializing).
Error Message
(Interface removed).
Error Message
failure).
Error Message
(Diag failure).
Cisco MDS 9000 Family System Messages Reference
2-56
ETHPORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_SPEED: Interface [chars] is down
The configured speed is not supported on this interface.
Explanation
Enter show port internal info to determine the range of speed supported on
Recommended Action
this interface.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
ETHPORT-5-IF_DOWN_INITIALIZING: Interface [chars] is down
The interface is in the process of coming up.
Explanation
If the interface is stuck in this state for an extended time, check the output of
Recommended Action
show port internal event-history to determine what it is waiting for.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
ETHPORT-5-IF_DOWN_INTERFACE_REMOVED: Interface [chars] is down
Explanation The interface has been removed.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
ETHPORT-5-IF_DOWN_LINK_FAILURE: Interface [chars] is down (Link
The physical link has gone down.
Explanation
Verify that the cable is connected and the remote end is not shut down.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
ETHPORT-5-IF_DOWN_LOOPBACK_DIAG_FAILURE: Interface [chars] is down
Diagnostic tests failed on the interface.
Explanation
Enter attach module to connect to the module and collect more information
Recommended Action
about the failed interface.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01