Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
is not compatible with current node image.
Error Message
not compatible with system image.
Error Message PS_SB_MGR-SLOT#-4-SB0_NOT_COMPAT_WITH_ADD_ON:Sibyte0 is not
compatible with add on.
Error Message
with current sibyte image.
Error Message IPS_SB_MGR-SLOT#-4-SB0_NOT_COMPAT_WITH_SUP:Sibyte0 is not compatible
with supervisor.
OL-15956-01
IPS_SB_MGR-SLOT#-4-NODE_NOT_COMPAT_WITH_CURRENT: svc-node[dec] image
The new SAN Volume Controller (SVC) image is not compatible with the SVC image
Explanation
currently running on the node.
Recommended Action
If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.3(2a).
Introduced
IPS_SB_MGR-SLOT#-4-NODE_NOT_COMPAT_WITH_SUP: svc-node[dec] image is
The SAN Volume Controller (SVC) image on the node is not compatible with the
Explanation
supervisor image.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.3(2a).
Introduced
The code of sibyte0 is not compatible with the add-on image running on the line card.
Explanation
Recommended Action
If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Cisco MDS SAN-OS Release 1.3(2a).
Deprecated
IPS_SB_MGR-SLOT#-4-SB0_NOT_COMPAT_WITH_SB:Sibyte0 is not compatible
The new code of sibyte0 is not compatible with the running sibyte image.
Explanation
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced
Cisco MDS SAN-OS Release 1.3(1).
Deprecated
Cisco MDS SAN-OS Release 1.3(2a).
Explanation
The code of sibyte0 is not compatible with the supervisor image.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-155