Zone-3 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message ZONE-3-ZS_ACTIVATION_FAILED_DUE_TO_QOS_DISABLED: Activation failed
due to qos not enabled.
ZONE-4
Error Message ZONE-4-LZ_OTHER_CMD_TO_ZONED_OUT_LUN: FCP command [hex] received from
SID=[chars] to DID=[chars] for LUN=[chars].
Error Message
from SID=[chars] to DID=[chars] for LUN=[chars].
Error Message ZONE-4-ZS_BROADCAST_LUN_WARNING: LUN member(s) and Broadcast attribute
are present in zone [chars] in vsan [dec]. Broadcast violations can occur for LUN
members.
Error Message ZONE-4-ZS_CHANGE_LC_UPGRADE_IN_PROGRESS: Change protocol request is
received from domain [dec] when linecard upgrade is in progress.
Cisco MDS 9000 Family System Messages Reference
2-474
Activation of zone set failed because QoS was not enabled.
Explanation
Make sure QoS is enabled and reactivate the zone set in the VSAN.
Recommended Action
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
The LUN read-only zoning process has received. FCP command received from the
Explanation
source ID to the destination ID for a zoned out LUN.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
ZONE-4-ROZ_WRITE_ACCESS_TO_READ_ONLY_LUN: FCP command [hex] received
The LUN read-only zoning process has received an FCP command from the source ID
Explanation
to the destination ID for a zoned out LUN.
No action is required.
Explanation
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Explanation Broadcast violations can happen in the named zone in the named VSAN because it has
LUN zone members.
No action is required.
Recommended Action
Explanation A change request has been received from the domain when a line card upgrade is in
progress. The change request is rejected.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01