Nvp-6; Nvp-Slot# Messages; Platform Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

NVP-SLOT# Messages

This section contains the virtual N port slot (NVP-SLOT#) messages.
NVP-SLOT#-2
Error Message
critical error please reboot ILC.

PLATFORM Messages

This section contains the platform messages.
PLATFORM-0
Error Message
clock-[dec].
Error Message PLATFORM-0-CHASSIS_CLKSW_MODULE_RESET: Modules reset due to clock
switch.
Error Message
OL-15956-01
NVP-SLOT#-2-CPP_CATASTROPHIC_ERROR: ERROR: Component ([chars]) caused
The listed component caused a critical error.
Explanation
Restart the line card.
Recommended Action
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
PLATFORM-0-CHASSIS_CLKSWITCH: Hardware clock switched to redundant
Clock module on chassis detected a failure and switched to the redundant clock module.
Explanation
Recommended Action Enter the show platform internal info command to collect more information
or use a similar Fabric Manager procedure.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
The chassis clock source has been switched and all Generation 1 line cards will be reset.
Explanation
The system will automatically continue using a redundant clock module.
Replace the failed clock module.
Recommended Action
Introduced Cisco MDS SAN-OS Release 3.0(1).
PLATFORM-0-CHASSIS_CLKSWRESET: Switch reset due to clock switch.
Chassis clock source has failed and system will be reset. System will automatically start
Explanation
using the redundant clock module.
Replace the failed clock module during the next maintenance window.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-215