Cfs-2 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message CFS-2-LOCK_FAILED: lock failed for sap [dec] due to internal error.
Error Message CFS-2-MALLOC_ERROR: Size [dec] bytes.
Error Message
Cisco MDS 9000 Family System Messages Reference
2-26
CFS-2-GENERAL_ERROR: [chars].
The Cisco Fabric Services process has encountered a critical error. The description of
Explanation
error is shown in the error message.
Refer to the listed error and take action as required.
Recommended Action
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
CFS-2-INITFAIL: CFS Service Init failed: [chars].
The Cisco Fabric Services initialization failed. The error message explains the reason
Explanation
for the failure.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
Explanation Lock failed because the unrestricted and uncoordinated count is not zero for an
application with the service access point (SAP) shown in error message.
To recover from this state, use the
Recommended Action
CLI command.
Introduced Cisco MDS SAN-OS Release 3.0(2a).
The Cisco Fabric Services could not allocate memory.
Explanation
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
CFS-2-PSS_ERROR: [chars]: PSS ret. val=[dec].
The Cisco Fabric Services encountered an error while operating on a persistent storage
Explanation
database.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
cfs internal decrement-unrestricted <app-sap>
OL-15956-01