Module-5 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message MODULE-5-MOD_OK: Module [dec] is online (serial: [chars]).
Error Message MODULE-5-MOD_OK: Module [dec] is online.
Error Message MODULE-5-MOD_PURGE_CONFIG: Purging the configuration for module [dec].
Error Message MODULE-5-MOD_REINIT: Re-initializing module [dec].
Error Message
download.
Error Message
[dec]/[dec]-[dec]/[dec] ([chars]) due to [chars] in device [dec] (error [hex]).
Cisco MDS 9000 Family System Messages Reference
2-202
Deprecated
Cisco MDS SAN-OS Release 2.0(1b).
Module named is ready to be configured and to switch traffic.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
Module is ready to be configured and to switch traffic.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Explanation
Notification is sent to remove module configurations.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.1(1).
Introduced
Module reported a failure during the initialization phase and will be reinitialized.
Explanation
Collect module information by entering the show module_internal all
Recommended Action
module command or by using a similar Fabric Manager procedure.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
MODULE-5-MOD_RESTART: Module [dec] is restarting after image
Module completed image download and restarted.
Explanation
Recommended Action
No action is required.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
MODULE-5-MOD_SOMEPORTS_FAILED: Module [dec] reported failure on ports
Explanation
Module reported a failure in the runtime diagnostic because of the failure of some of
the ports.
Collect module information by entering the show module internal all module
Recommended Action
[dec] command or by using a similar Fabric Manager procedure.
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01
Advertisement
Table of Contents
