Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 262
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message PLATFORM-2-PS_OK: Power supply [dec] ok (Serial number [chars]).
Error Message PLATFORM-2-PS_MISMATCH: Detected power supply [chars]. This reduces
the redundant power available to the system and can cause service disruptions
(Serial No. [chars]).
Error Message PLATFORM-2-PS_REMOVE: Power supply [dec] removed (Serial number
[chars]).
Error Message
[dec]. (Serial No. [chars]).
Error Message
CISCO MDS 9500/9200 Multilayer Switches ((Serial number[chars]).
Cisco MDS 9000 Family System Messages Reference
2-226
Power Supply is ok.
Explanation
Recommended Action
No action is required.
Cisco MDS SAN-OS Release 3.0(1).
Introduced
Detected a new power supply that has reduced capacity compared to a previous power
Explanation
supply.
Refer to power supply document on increasing or decreasing power supply
Recommended Action
capacity, configuring power supplies, and so on. Enter the show environment power and show
platform internal info CLI command or use a similar Fabric Manager/Device Manager procedure
to collect more information.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Power Supply is removed.
Explanation
Recommended Action
No action is required.
Introduced
Cisco MDS SAN-OS Release 3.0(1).
PLATFORM-2-PS_REMOVE_LAST: Unexpected removal of last power supply
Unexpected removal of the only power supply in the system.
Explanation
Power supply unit may be faulty. Contact your customer support representative
Recommended Action
to replace the unit.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
PLATFORM-2-PS_UNKNOWN: Detected an unknown power supply [dec] for
Explanation
Unable to determine power supply type. Default power supply types will be assumed.
Refer to the appropriate product hardware installation guide for information
Recommended Action
on increasing or decreasing power supply capacity and configuring power supplies.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01
Advertisement
Table of Contents
