Pss-5; Qos Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

QOS Messages

This section contains the quality of service (QOS) messages.
QOS-2
Error Message
Error Message
Error Message
Error Message
Error Message
Cisco MDS 9000 Family System Messages Reference
2-274
QOS-2-EXITING: Exit reason: [chars].
The QoS manager process has exited. The process has probably been restarted
Explanation
automatically.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
QOS-2-GENERAL_ERROR: [chars].
The QoS manager has encountered a critical error. The description of error is shown in
Explanation
the error message.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
QOS-2-INITFAIL: QoS Manager Initialization failed: [chars].
Explanation QoS manager initialization failed. The error message explains the reason for the failure.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
QOS-2-MALLOC_ERROR: Size [dec] bytes.
The QoS manager could not allocate memory.
Explanation
Copy the error message exactly as it appears on the console or in the system
Recommended Action
log. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you
purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
QOS-2-PSS_ERROR: [chars]: PSS returned value=[dec].
The QoS manager encountered error while operating on a persistent storage database.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01