Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 506
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message ZONE-2-ZS_LUN_MEMBER_LIMIT_EXCEEDED: The limit for maximum number of
lun members exceeded.
Error Message ZONE-2-ZS_MALLOC_FAILURE: Memory allocation failed for size [dec].
Error Message ZONE-2-ZS_MEMBER_LIMIT_EXCEEDED: The limit for maximum number of
members exceeded.
Error Message
Isolating Interface [chars] (VSAN [dec]).
Error Message
[chars].
Cisco MDS 9000 Family System Messages Reference
2-470
The number of LUN members configured has exceeded the maximum number of LUN
Explanation
members allowed across all VSANs. Because of this, distribution or merge operation may fail.
Recommended Action
Make sure the number of LUN members is less than the maximum allowed
across all VSANs.
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
Memory allocation failed.
Explanation
Restart the process.
Recommended Action
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
The number of members configured has exceeded the maximum number of members
Explanation
allowed across all VSANs. Because of this, distribution or merge operation may fail.
Recommended Action
Make sure the number of members is less than the maximum allowed across
all VSANs.
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
ZONE-2-ZS_MERGE_ADJ_NO_RESPONSE: Adjacent switch not responding,
Interface on the VSAN was isolated because the adjacent switch is not responding to
Explanation
zone server requests.
Flap the interface.
Recommended Action
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
ZONE-2-ZS_MERGE_FAILED: Zone merge failure, Isolating interface
Interface isolated because of a zone merge failure.
Explanation
Compare the active zone set with the adjacent switch by entering the zone
Recommended Action
merge interface CLI command or by using a similar Fabric Manager/Device Manager procedure.
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01
Advertisement
Table of Contents
