Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 254

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message PLATFORM-0-XBAR_CARD_CLK_FAIL: Xbar card in slot:[dec] (Serial number
[chars]) encountered clock failure.
Error Message
number [chars]) Incompatible with backplane chassis Part Num:[chars].
Error Message
(Serial number [chars]).
PLATFORM-1
Error Message
Error Message
Cisco MDS 9000 Family System Messages Reference
2-218
Introduced Cisco MDS SAN-OS Release 1.2(2a).
The xbar in the slot named encountered clock failure.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
PLATFORM-0-XBAR_CARD_INCOMPAT_CHASSIS: Xbar card in slot:[dec] (Part
The xbar in the slot named is incompatible with backplane chassis.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
PLATFORM-0-XBAR_WRONGSLOTNUM: Xbar powered up in WRONG SLOT:[dec]
Explanation The xbar in the slot named powered up in wrong slot.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
PLATFORM-1-CASA_FAN_FAIL: Fan module [dec] Failed.
Fan module failed and needs to be replaced. This can lead to overheating and
Explanation
temperature alarms.
Enter the show platform internal info CLI command or use a similar Fabric
Recommended Action
Manager/Device Manager procedure to collect more information.
Cisco MDS SAN-OS Release 1.3(4a).
Introduced
PLATFORM-1-FAN_FAIL: Fan module Failed.
Fan module failed and needs to be replaced. This can lead to overheating and
Explanation
temperature alarms.
Recommended Action Enter the
Manager/Device Manager procedure to collect more information.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
show platform internal info
CLI command or use a similar Fabric
OL-15956-01