Ficon-3 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message FICON-3-E_INVALID_PA_BRINGUP_FAIL: [chars].
Error Message FICON-3-E_PORT_PROHIBIT_BRINGUP_FAIL: [chars].
Error Message
Error Message FICON-3-E_UNASSIGN_NO_PN_FAIL: [chars].
FICON-5
Error Message
Cisco MDS 9000 Family System Messages Reference
2-112
This port either has an invalid port address assigned or has no port address assigned.
Explanation
Recommended Action Assign a valid FICON port number to the port.
Cisco MDS SAN-OS Release 3.0(1).
Introduced
This port has been prohibited. Prohibiting E or TE ports is not allowed. This port cannot
Explanation
be configured in E mode or TE mode until the prohibit dynamic connectivity mask configuration is
changed.
Correct the prohibit dynamic connectivity mask (PDCM) for this port to bring
Recommended Action
it up as an E or TE port in a FICON VSAN.
Cisco MDS SAN-OS Release 1.3(3).
Introduced
FICON-3-PDCM_CHANGE_REJ_E_PORT: [chars].
The FICON prohibit dynamic connectivity mask (PDCM) change rejected because an
Explanation
E or TE port is being prohibited. Prohibiting an E or TE port in not allowed.
Recommended Action Correct the prohibit dynamic connectivity mask (PDCM) for this port to bring
the port up as an E or TE port in a FICON VSAN.
Cisco MDS SAN-OS Release 3.0(1).
Introduced
Only port number already assigned can be removed.
Explanation
Recommended Action Check port numbers in the configuration.
Introduced Cisco MDS SAN-OS Release 3.0(1).
FICON-5-STARTING: FICON manager process starting.
FICON manager process is being started.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01