Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 113

Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
Table of Contents

Advertisement

Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
initialization sequence failed.
Error Message
(Common Fabric Name [chars]).
FCDOMAIN-3
Error Message FCDOMAIN-3-COMMITERRORLOCALINVALIDALLOWEDDOMS: A remote switch
attempted to locally apply an illicit allowed domains configuration.
Error Message
(domain ID [dec], WWN [chars]) refuses to locally apply the proposed allowed
domains.
OL-15956-01
FCDOMAIN-2-SYSBIND_FAILED: Bind to System Manager service failed.
The domain manager has not been able to contact the system manager.
Explanation
Recommended Action
No action is required.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FCDOMAIN-2-SYSMGR_INITIALIZATION_FAILED: System Manager
Explanation
The domain manager has not been able to complete the initialization sequence with the
system manager. The domain manager process depends on resources not available at the moment.
The switch might be short in memory or some other component might be unable to provide the
necessary information to the domain manager.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FCDOMAIN-2-VSAN_MERGE_DETECTED:
The local VSAN and remote VSAN have the same principal switch and are connected
Explanation
in the same logical fabric.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
A remote switch attempted to locally apply an allowed domains configuration that does
Explanation
not include all currently assigned domains or the locally configured domain.
No action is required.
Recommended Action
Introduced
Cisco MDS SAN-OS Release 3.0(1).
FCDOMAIN-3-COMMITERRORREMOTEINVALIDALLOWEDDOMS: A remote switch
Explanation
The remote switch the with domain ID and WWN listed in the error message refuses to
locally apply the proposed allowed domains. This is probably because the proposed allowed
domains list is incompatible with the locally configured domain or domain ID list.
Recommended Action
Check the configuration on the remote switch, and make sure that the proposed
allowed domains include the local domain ID. Also, make sure that the proposed allowed domains
include all the domains in the local domain ID list.
Merge detected with VSAN [dec]
Cisco MDS 9000 Family System Messages Reference
2-77

Advertisement

Table of Contents
loading

Table of Contents