Zone-2 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message ZONE-2-ZS_ALIAS_LIMIT_EXCEEDED: The limit for maximum number of
aliases exceeded.
Error Message
attribute groups exceeded.
Error Message
Error Message
VSAN [dec].
Error Message
Error Message
[chars].
OL-15956-01
The number of aliases configured has exceeded the maximum number of aliases
Explanation
allowed per VSAN. Because of this, a distribution or merge operation may fail.
Recommended Action
Make sure the number of aliases is less than the maximum allowed in a VSAN.
Introduced
Cisco MDS SAN-OS Release 2.0(1b).
ZONE-2-ZS_ATTR_GROUP_LIMIT_EXCEEDED: The limit for maximum number of
The number of attribute groups configured has exceeded the maximum number of
Explanation
attribute groups allowed in a VSAN. Because of this, distribution or merge operation may fail.
Make sure the number of attribute groups is less than the maximum allowed
Recommended Action
in a VSAN.
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
ZONE-2-ZS_CHANGE_ACA_FAILED: ACA failed : [chars].
The zone server cannot acquire change authorization.
Explanation
Recommended Action
Verify the interoperability mode on all the switches or retry later.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
ZONE-2-ZS_CHANGE_ACQUIRE_AUTH_FAILED: Acquire authorization failed on
Explanation
The zone server cannot acquire authorization on the VSAN.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
ZONE-2-ZS_CHANGE_ACTIVATION_FAILED: Activation failed.
The zone server cannot activate the zone set.
Explanation
No action is required.
Recommended Action
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
ZONE-2-ZS_CHANGE_ACTIVATION_FAILED_RESN: Activation failed : reason
The zone server cannot activate because of reason shown in the error message.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-465
Advertisement
Table of Contents
