Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 253

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
drivers.
Error Message
Error Message PLATFORM-0-SYS_SHUTDOWN: System shutdown in [dec] seconds due to major
temperature alarm.
Error Message PLATFORM-0-MDS9124: System shutdown in [dec] seconds due to less than
4 fans operating.
Error Message PLATFORM-0-SYS_SHUTDOWN_FAN_REMOVAL: System shutdown in [dec] seconds
due to fan removal.
Error Message
module drivers.
OL-15956-01
PLATFORM-0-SYS_LC_DRIVER_LOAD_FAILED: Failed to load linecard module
Failed while trying to load drivers.
Explanation
Image is possibly corrupt. Load a different image.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
PLATFORM-0-SYS_RESET: [chars] System shutdown in [dec] seconds.
Explanation System shut down will occur in the number of seconds shown in the error message.
Enter the show env temperature CLI command or use a similar Fabric
Recommended Action
Manager/Device Manager procedure to collect more information.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
System shut down in seconds because of temperature exceeding major threshold.
Explanation
Use the showenvtemperature CLI command to collect more information.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
System shutdown in seconds because of less than 4 fans operating.
Explanation
Enter a show env fan command to collect more information.
Recommended Action
Cisco MDS SAN-OS Release 3.1(1).
Introduced
System shut down will occur in the number of seconds shown because the fan has been
Explanation
removed.
Enter the show env fan CLI command or use a similar Fabric Manager/Device
Recommended Action
Manager procedure to collect more information.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
PLATFORM-0-SYS_SUP_DRIVER_LOAD_FAILED: Failed to load supervisor
Explanation Failed while trying to load drivers.
Image is possibly corrupt. Load a different image.
Recommended Action
Cisco MDS 9000 Family System Messages Reference
2-217