Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Node data not found - node rejected from cluster [chars].
Error Message
Error Message
[chars].
Error Message
slot [dec]: [chars].
Error Message
[chars], VSAN [dec] internal error: [chars].
OL-15956-01
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_RESET_AND_REJECT )
Node data was not found. The node has been rejected from the cluster.
Explanation
Examine error logs to determine if another recorded error caused the loss of
Recommended Action
the node data and, if so, follow the actions for that error. If no other error was recorded, the node
may have lost power without saving data or been reset. Attempt to determine the cause of the power
loss or reset. If no cause can be determined, then follow these steps: 1. Reinstall the code on the
node. The node will have to be removed and added back to the cluster. 2. Ensure that the software
is at the latest level on the cluster. If not, upgrade the cluster and if necessary repeat Step 1 with the
latest level of code. 3. If the error continues, ask your customer support representative for assistance.
It may be necessary to replace the Caching Services Module.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-3-NODE_ERR_MSG: [chars].
Syslog message from a SAN Volume Controller (SVC) interface node.
Explanation
Recommended Action
No action is required.
Introduced
Cisco MDS SAN-OS Release 1.3(1).
SVC-3-SVC_SYSLOG_IF_INTERNAL_ERROR: Interface [chars] internal error:
SAN Volume Controller (SVC) interface internal error.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-3-SVC_SYSLOG_LC_INTERNAL_ERROR: Unable to send MTS to linecard in
Line card messaging and transaction service (MTS) failure.
Explanation
Recommended Action
No action is required.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-3-SVC_SYSLOG_NPORT_INTERNAL_ERROR: [chars] N-port for Interface
Explanation
N port internal error.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-329