Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 401

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message SYSMGR-2-CFGWRITE_ABORTED_LOG: Unable to open a log file for the new
configuration: [chars] (error-id [hex]). Aborting configuration copy.
Error Message
timeout.
Error Message
Error Message
"[chars]" (error-id [hex]).
Error Message
service "[chars]".
OL-15956-01
An attempt to copy the running configuration to startup configuration has failed because
Explanation
a log file could not be created.
Recommended Action If the problem persists, issue the init system CLI command from the
switch(boot)# prompt to initialize the configuration partition. Note: This is a disruptive command.
This command will initialize the switch, reset the entire internal disk, and reformat the bootflash:
partition.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SYSMGR-2-CFGWRITE_TIMEOUT_ABORT: Configuration copy aborted by
A service failed to store its configuration in the time-out period. The configuration save
Explanation
operation was terminated.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
SYSMGR-2-CFGWRITE_USER_ABORT: Configuration copy aborted by the user.
The user typed CTRL+C while the configuration was being saved. The configuration
Explanation
save operation was terminated.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
SYSMGR-2-CONVERT_FUNC_FAILED: Conversion function failed for service
The conversion function failed for this service.
Explanation
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SYSMGR-2-CONVERT_FUNC_NOTFOUND: Conversion function not found for
Explanation The system could not find an appropriate conversion function for this service.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-365