Port_Security Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

PORT_SECURITY Messages

This section contains the port security (PORT_SECURITY) messages.
PORT_SECURITY-2
Error Message
for [chars].
Error Message
[chars].
Error Message
Error Message
OL-15956-01
PORT_SECURITY-2-ALLOC_FAILED: Memory allocation failed for size:[dec]
Memory allocation failed for the entity and size shown in the error message.
Explanation
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.3(4a).
PORT_SECURITY-2-FEATURE_DISABLED: Feature [chars] disabled due to
The feature is unavailable and will be disabled now.
Explanation
Install the correct license and reenable.
Recommended Action
Cisco MDS SAN-OS Release 1.3(4a).
Introduced
PORT_SECURITY-3-BINDING_CONFLICT: [chars] in VSAN [dec].
An already logged in device is in conflict with the port security manager active binding
Explanation
configuration. The error message indicates the WWN of the login entity, interface and the VSAN.
For port security, the autolearn feature can be used with activation to prevent
Recommended Action
this. This violating device or switch will be logged out.
Cisco MDS SAN-OS Release 1.3(4a).
Introduced
PORT_SECURITY-3-BINDING_VIOLATION: [chars] in VSAN [dec].
A login occurred that violates the port security manager (PSM) binding configuration.
Explanation
The error message indicates the WWN of the login entity and the VSAN.
Only entries in the activated database of PSM can log in. Change the
Recommended Action
configuration and activate it again.
Cisco MDS SAN-OS Release 1.3(4a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-263