Mcast Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

MCAST Messages

This section contains the multicast (MCAST) messages.
MCAST-2
Error Message MCAST-2-SHUTDOWN: Process shutting down: [chars].
MCAST-4
Error Message
MCAST-5
Error Message
Error Message
Cisco MDS 9000 Family System Messages Reference
2-196
The multicast process is shutting down.
Explanation
The action depends on the situation. The multicast process can shut down
Recommended Action
gracefully because of a system restart (in which case no action needs to take place) or because of a
failure. The message associated with the syslog should be self explanatory. If the process can restart
properly, there is no immediate harm for the system stability and the suggested action is to report
the syslog event together with an explanation of the operations most recently performed on the
system. If the component cannot restart properly, contact your support representative. If you
purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased
support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
MCAST-4-ERROR: [chars].
Explanation Multicast encountered a generic error.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
MCAST-5-BAD_MSG: Received bad message: [chars].
Multicast has received a malformed or unrecognizable message.
Explanation
Recommended Action No action is required.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
MCAST-5-START: Process has been started.
The multicast process has started.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01