Sme_Cpp-2; Sme_Cpp-3 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message SME_CPP-3-LOG_ERR_SME_INTF_MISMATCH_CRYPTO_NODE_PARAMS: SME interface
[chars] part of cluster [chars] with ID [chars] as a crypto node [chars], but the
DPP is identified as [chars].
SME_CPP-4
Error Message SME_CPP-4-LOG_ERR_SME_INTF_MISMATCH_NOT_PART_OF_ANY_CLUSTER: SME
interface [chars] not part of any cluster, but the DPP has state from a previous
instance of a cluster [chars] with ID [chars].
Error Message SME_CPP-4-LOG_ERR_SME_INTF_MISMATCH_NOT_PROVISIONED: SME interface
[chars] not provisioned, but the DPP has state from a previous instance of a
cluster [chars] with ID [chars].
Error Message SME_CPP-SLOT#-2-LOG_ERR_SME_ITL_MISCONFIG: Different physical LUNs
under same Tape Device - Device Name:[chars] Host PWWN:[chars] Tgt PWWN:[chars]
LUN Id:[chars] Serial Num:[chars] Serial Num:[chars].
SME_CPP-5
Error Message SME_CPP-5-SME_DISABLED: SME Disabled.
OL-15956-01
Explanation
DPP has persistent state about a previous cluster membership on a different switch or
module.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.2(2).
Introduced
DPP has persistent state about a previous cluster membership incarnation, but the
Explanation
interface is not part of any cluster.
No action is required.
Recommended Action
Introduced
Cisco MDS SAN-OS Release 3.2(2).
Explanation
DPP has persistent state about a previous cluster membership incarnation, but the
switch has not provisioned the interface for SME.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.2(2).
Introduced
Different physical LogicalUnit numbers exist or occur on the same tape device.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.2(2).
Introduced
Explanation
SME service is Disabled.
No action is required.
Recommended Action
Cisco MDS 9000 Family System Messages Reference
2-309
Advertisement
Table of Contents
