Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 42

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
ACL-2
Error Message
[chars].
Error Message
reason: [hex].
Error Message ACL-2-ACL_LINECARD_STATUS: Status from linecard: [dec], for module:
[chars](ID: [dec]), status : [dec], error_id: [hex], catastrophic: [chars],
restart count: [dec].
Cisco MDS 9000 Family System Messages Reference
2-6
ACL-2-ACL_HA_FAILURE: Failed to do high availability operation:
Explanation The high availability operation failed because of the reason shown in the error message.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
ACL-2-ACL_INIT_FAILED: Initialization failed for ACL: [chars],
Initialization failed for the ACL because of the reason shown in the error message.
Explanation
Recommended Action No action is required.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
This message gives the status from the line card.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01