Wwn Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

WWN Messages

This section contains the World Wide Name (WWN) messages.
WWN-1
Error Message
Error Message WWN-1-TYPES2_5_ALERT: [dec] (< [dec] %) Remain.
WWN-2
Error Message
Error Message
Cisco MDS 9000 Family System Messages Reference
2-452
WWN-1-TYPE1_ALERT: [dec] (< [dec] %) Remain.
The WWN manager has run out of WWNs. No new dynamically allocated WWNs are
Explanation
available. However, statically assigned WWNs such as switch WWN, port WWN, and so on are still
available.
Add additional WWNs by programming a new secondary MAC address and
Recommended Action
its range.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
The WWN manager has run out of WWNs of NAA (Network Address Authority) types
Explanation
2 and 5.
Add additional WWNs by programming a new secondary MAC address and
Recommended Action
its range.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
WWN-2-BKPLN_PROM_CANT_READ: Can not read backplane PROM.
Explanation The WWN manager has failed to read chassis information. No dynamic WWNs could
be allocated.
Copy the error message exactly as it appears on the console or in the system
Recommended Action
log. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you
purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
WWN-2-EXITING: Exited due to [chars].
The WWN manager process has exited because of the error shown in the error message.
Explanation
The process has probably been restarted automatically.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01