Callhome Messages; Callhome-2 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
CALLHOME-3
Error Message CALLHOME-3-CALLHOME_CFS_MERGE_OPERATION_FAILED: [chars].
Error Message CALLHOME-3-CALLHOME_CFS_OPERATION_FAILED: [chars] : [chars].
Error Message CALLHOME-3-CALLHOME_MAX_ALERT_MSG: [chars].
Error Message
[chars] reason:[chars].
Cisco MDS 9000 Family System Messages Reference
2-20
CALLHOME-2-PROGRAM_EXIT: callhome process ending: [chars].
Call Home process is exiting because of the reason shown in the error message.
Explanation
Recommended Action
If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
A Call Home merge operation failed.
Explanation
Recommended Action
Check the reason for the failure of the CFS operation and rectify the problem.
Introduced
Cisco MDS SAN-OS Release 3.0(1).
The Call Home operation using Cisco Fabric Services (CFS) failed because of the
Explanation
reason shown in the error message.
Check the reason for the failure of the CFS operation and rectify the problem.
Recommended Action
Introduced
Cisco MDS SAN-OS Release 2.0(1b).
A Call Home alert occurred.
Explanation
Recommended Action
Check the reason listed for the Call Home message and rectify the problem.
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
CALLHOME-3-EVENT_PROCESS_ERROR: error in processing callhome event
Explanation
An error occurred in processing the Call Home event because of the reason shown in the
error message.
Verify your Call Home configuration for proper configuration. Verify the
Recommended Action
SMTP server address, verify e-mail addresses for destination profiles, and enable status of Call
Home. Enter the show callhome CLI command to display the configuration. You can alternatively
use Fabric Manager and/or Device Manager instead of the command line method.
Cisco MDS SAN-OS Release 1.3(3).
Introduced
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01
Advertisement
Table of Contents
