Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 420

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
(error-id [hex]).
Error Message
same as current software version.
Error Message SYSMGR-3-RTDBCTRL_SRVTIMEOUT: Service [chars] failed to respond back
to System Manager in the specified timeout period.
Error Message SYSMGR-3-RTDBCTRL_SRVTIMEOUT: Service [chars] failed to respond to the
request to return its
Error Message SYSMGR-3-SERVICE_CRASHED: Service "[chars]" (PID [dec]) hasn't caught
signal [dec][chars]
Cisco MDS 9000 Family System Messages Reference
2-384
SYSMGR-3-PARTIAL_CFGWRITE_FAILED: Partial configuration copy failed
The requested configuration copy has failed. The error message shows the error ID
Explanation
representing the failure reason.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
SYSMGR-3-PARTIAL_CFGWRITE_VER_MISMATCH: Startup-config version not
Startup configuration version not same as current software version.
Explanation
Enter the copy running startup CLI command or use a similar Fabric
Recommended Action
Manager/Device Manager procedure, and try again.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Explanation A required service has failed to send a response after receiving a request for the fabric
switch upgrade.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 3.1(1).
A required service failed to save the runtime database after a request to stop
Explanation
communication. Saving of the runtime database failed.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 2.1(1a).
Introduced
A service has terminated its execution abnormally. The service might be restarted,
Explanation
depending on the High Availability policies implemented for the service.
Recommended Action Use the show process CLI command to verify that the service has been
restarted.
Cisco MDS SAN-OS Release 1.0(2a).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
runtime database in the timeout period.
OL-15956-01