Licmgr-3 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
Table of Contents

Advertisement

Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
type [dec] from addr [dec]:[dec].
Error Message
Application(s)
Error Message
Error Message
without a valid license file.
Error Message
[chars] feature, where as [dec] licenses are installed.
OL-15956-01
LICMGR-3-LOG_LIC_MESSAGE_ERROR: could not handle message: [chars] of
Could not handle an interprocess communications (IPC) message, of the type shown in
Explanation
the error message, sent by a component running on the shown node and service access point (SAP).
Recommended Action
If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
LICMGR-3-LOG_LIC_NO_LIC:
shutdown in [dec] days.
The feature has not been licensed. The feature will work for a grace period, then any
Explanation
applications using the feature will be shut down.
Install the license to continue using the feature.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
LICMGR-3-LOG_LIC_SERVER_DOWN: License Server Down [dec].
A connection to the license server could not be created.
Explanation
Recommended Action
If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
LICMGR-3-LOG_LIC_SPROM_LIC:
The feature has been licensed the number of times shown in the error message without
Explanation
a valid license file. This means one or more license files are missing for the feature and must be
reinstalled.
Install the license to continue using the feature.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
LICMGR-3-LOG_LIC_TOO_MANY_LIC: Only [dec] licenses are supported for
More licenses are installed than allowed.
Explanation
Recommended Action
If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.3(3a).
Introduced
No license(s) present for feature [chars].
Feature [chars] issued [dec] licenses
Cisco MDS 9000 Family System Messages Reference
2-193

Advertisement

Table of Contents
loading

Table of Contents