Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 322
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
RIB-4
Error Message
Error Message
Error Message
Error Message RIB-4-PC_LIMIT: PC number greater than 128 (ignored by RIB).
Cisco MDS 9000 Family System Messages Reference
2-286
RIB-3-SEND_STANDBY: Cannot talk to standby rib.
Lost a Routing Information Base (RIB) to Forwarding Information Base (FIB)
Explanation
transaction log due to an interprocess communications (IPC) failure.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
RIB-4-CPU_HOG: Inactive or busy.
Either the Routing Information Base (RIB) was not scheduled to run, or RIB was busy,
Explanation
and RIB did not service the message or timer queue for an extended period.
Enter the debug rib error command, or use a similar Fabric Manager
Recommended Action
procedure, then recreate the operation scenario to find out more details.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
RIB-4-DUP_FIB: Duplicate response from fib.
The Routing Information Base (RIB) ignored duplicate response from the Forwarding
Explanation
Information Base (FIB).
Enter the debug rib error command, or use a similar Fabric Manager
Recommended Action
procedure, then recreate the operation scenario to find out more details.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
RIB-4-LATE_FIB: Late response from fib.
Explanation
The Routing Information Base (RIB) ignored late response from the Forwarding
Information Base (FIB).
Recommended Action
Enter the debug rib error command, or use a similar Fabric Manager
procedure, then recreate the operation scenario to find out more details.
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
The Routing Information Base (RIB) ignored the PC because the PC number was greater
Explanation
than 128.
Use a PC number less than 128.
Recommended Action
Cisco MDS SAN-OS Release 3.1(2).
Introduced
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01
Advertisement
Table of Contents
