Ficon-2 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
FICON-3
Error Message FICON-3-E_ASSIGN_BINDING_PN_FAIL: [chars].
Error Message
Error Message
Error Message
Error Message
Error Message FICON-3-E_DUPLICATE_PN_ASSIGN_WARNING: [chars].
OL-15956-01
Port number has FCIP or port channel binding that cannot be removed or changed.
Explanation
Remove port number binding of the logical interface first.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
FICON-3-E_ASSIGN_INVALID_PN_PARAM: [chars].
Invalid port number parameters in command.
Explanation
Check port numbers in the command.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
FICON-3-E_ASSIGN_OVERLAP_PN_FAIL: [chars].
Port number assigned to physical and logical cannot overlap.
Explanation
Check the port numbers in the command.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
FICON-3-E_ASSIGN_PN_NOT_DOWN_FAIL: [chars].
Only port number assigned to a port in the down state can be removed or changed.
Explanation
Recommended Action Bring down the port and then change the assigned port number.
Introduced Cisco MDS SAN-OS Release 3.0(1).
FICON-3-E_ASSIGN_PROHIBIT_PN_FAIL: [chars].
Logical port address cannot be prohibited.
Explanation
Check port numbers in the command.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
This port has the same port number assigned to another port in the same FICON VSAN.
Explanation
No more than one port should have the same port number in each FICON VSAN.
Recommended Action Avoid duplicate number assignments in each FICON VSAN.
Cisco MDS SAN-OS Release 3.0(1).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-111