Table of Contents
Advertisement
Network and Security Manager Administration Guide
316
Downloading can be done through a proxy server if your Internet connection is through
a proxy server. To configure a proxy server, use Tools > Preferences and select Proxy
Settings.
Downloading Schemas Using the NSM UI
To download a schema using the NSM UI, follow these steps:
In the Administer panel, select Server Manager > Schema Information.
1.
Schema Information appears in the main display area. It shows information about
the schema that is currently staged (the most recently downloaded schema) and the
schema that is currently active. Details for each schema version include the version
number, the date of last update, a brief description of what changed in that version,
and a list of files affected by the change.
The schema information also lists any device families that are disabled in either the
staged schema or the running schema, along with the last supported schema version.
The display also shows a warning message if the staged schema has disabled families.
Click Download Schema to look for new schemas to download.
2.
The NSM UI displays a new screen for you to select the source from which to update
the schema.
From the Update Source list, choose Juniper Update Server to get any new schemas
3.
directly from the server. Choose File to retrieve the schema from an intermediary file.
Click Next to display information about the latest schema on the source (Juniper
4.
Update Server or file) along with current schema information. This information will
also indicate if the latest schema on the source contains disabled families. Use this
information to determine whether you want to download the schema. The Finish
button is activated only if a new schema is available.
Click Finish to launch a job to download the new schema.
5.
The new schema overwrites the previously staged schema in the NSM repository.
When finished, NSM sends an e-mail message to the NSM administrator configured
for receiving e-mail notifications.
Downloading Schemas Using the GUI Server CLI
To download a schema using the GUI Server CLI, use the
an update is available, this command downloads and stages the update into the NSM
repository and notifies the NSM administrator by e-mail of the new download.
The primary advantage of using a CLI command to perform this operation is that you can
set up a cron job to periodically look for new schemas and download them.
Downloading a schema using GUI Server CLI will fail if the schema on the Juniper Update
Server contains a disabled device family that is not yet disabled in the NSM staged
schema.
update-schema
command. If
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
