Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual page 164

Table of Contents

Advertisement

Network and Security Manager Administration Guide
114
Click the Add icon and select Device to open the Add Device wizard.
3.
Select Device is Reachable (default).
4.
Click Next. The Specify Connection Settings dialog box opens.
5.
Enter the following connection information:
6.
Enter the IP Address of the security device.
Enter the username of the device administrator.
Enter the password for the device administrator.
NOTE: All passwords handled by NSM are case-sensitive.
Select the connection method (Telnet, SSH version 1, SSH version 2) and the port
number for the selected service.
If you selected Telnet, click Next and go directly to step 7.
If you selected an SSH version, click Next and the Verify Device Authenticity dialog
box opens. The device wizard displays the RSA Key FingerPrint information; to
prevent man-in-the-middle attacks, you should verify the fingerprint using an
out-of-band method.
After the wizard displays the autodetected device information, verify that the device
7.
type, ScreenOS version, and the device serial number are correct. NSM autodetects
the hostname configured on the device and uses it as the device name. You can also
change the autodetected hostname.
Modify the autodetected device name within the device from its config editor page in
8.
NSM, and select
Update device
If you modified the device host name through the Junos OS CLI, SNMP, or J-Web
interface, you can modify the device name again in NSM after importing the device,
using the edit option. If the device was bulk added, the name you specify in the CSV
file is used.
NOTE: If you select the
workflow, NSM cannot detect the hostname automatically. You need to
specify a device name.
Click Next to add the device to NSM.
9.
After the device is added, click Next to import the device configuration.
10.
Click Finish to complete the Add Device wizard.
11.
Double-click the device in Device Manager to view the imported configuration.
12.
.
Device is not reachable
Copyright © 2010, Juniper Networks, Inc.
or the
Model Device

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network and security manager 2010.4

Table of Contents