Table 72: Vsd/Rto Summary; Viewing Vsd/Rto Information; Viewing Vsd Counter Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide

Viewing VSD/RTO Information

694
Table 71: NSRP Device Summary (continued)
Item Description
Major Events The total number of Major events that occurred.
Minor Events The total number of Minor events that occurred.
Warning Events The total number of Warning events that occurred.
Intermediate Events The total number of Intermediate events that occurred.
Clear Events The total number of Clear events that occurred.
Double-click the cluster security device icon or click the + icon that corresponds to the
cluster security device icon to view the virtual security devices (VSD) and runtime objects
(RTO) that have been attached to this cluster.
Click the VSD or RTO icon to see summary information describing the object. Table 72
on page 694 describes the information available from the VSD/RTO summary:

Table 72: VSD/RTO Summary

Item
Cluster
VSD(RTO)
No of Devices
Init Hold Time (sec)
Heartbeat Interval (ms)
Heartbeat Lost Threshold (ms)
Master
Primary Backup

Viewing VSD Counter Details

Click the Counters tab to view specific information about your VSD counters. Table 73
on page 695 describes the information that is available from the VSD counters view:
Description
The name of the cluster associated with this VSD.
The name of this VSD (or RTO).
The total number of security devices that are associated with
this VSD.
The initial hold time state (in seconds) of the VSD.
The time interval (in milliseconds) between each heartbeat.
Threshold level required to change over to the backup security
device.
The master system.
The primary backup system.
Copyright © 2010, Juniper Networks, Inc.