Using E-Mail Required And Optional Format-Specific Filters; Exporting To Syslog; Using Syslog Required And Optional Format-Specific Filters - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
E-mail/SMTP
--recipient
--sender
Syslog Multiple
--server No
806
The Device Server exports all log records to the specified e-mail address for the recipient.
NOTE: You do not specify the SMTP server IP address in the
The system uses the IP address configured for e-mail in the Log Actions area
of the GUI Server (in the NSM UI). To configure this IP address, select
Manager > Servers
Then double-click the server name on the
IP address, and the
SMTP Server
the
Email Notification
to E-mail" on page 798. You must configure the IP address before attempting
to export logs to an e-mail address.

Using E-mail Required and Optional Format-Specific Filters

You can use the following required and optional format-specific filters for exporting to
e-mail:
Multiple Required
Yes Yes
No No

Exporting to syslog

The syslog action directs the system to output logs to a syslog server in syslog format.
You must specify the IP address of the syslog server that receives the exported log records
and the syslog facility.
To export:
Login to the Device Server as root, then change to the utility directory by typing: cd
1.
/usr/netscreen/DevSvr/utils.
To export to a file, type:
2.
sh devSvrCli.sh --log2action --action --syslog <server> <facility
The Device Server exports all log records to the specified IP address for the syslog server.

Using Syslog Required and Optional Format-Specific Filters

You can use the following required format-specific filters for exporting to syslog:
Required
Yes
in the Administer panel of the main configuration tree.
GUI Server
From Email Address
tab. For details on configuring this value, see "Exporting
Meaning
Specify the receiving e-mail address for the SMTP log
records
Specify the sender e-mail address
Meaning
Specify syslog server IP address as [IP|FQDN[:<port>]].
Examples:
192.168.1.25:7889
syslog.server@mycompany.com:7889
Copyright © 2010, Juniper Networks, Inc.
utility.
log2action
Server
panel and enter the
and in
To Email Address