Miscellaneous Device Operations - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Miscellaneous Device Operations

Copyright © 2010, Juniper Networks, Inc.
The SurfControl CPA server periodically updates its predefined category list, but does
not notify its clients when the list is updated. To ensure that the security device and NSM
use most up-to-date predefined categories, you must update the list manually, first on
the device, then for the NSM system.
NOTE: The security device periodically polls the CPA server for category
updates. The default interval is every two weeks; for details on changing this
settings, see the Network and Security Manager Online Help topic, "Configuring
Firewall/VPN Devices".
You must perform both steps listed below, in the following order:
In the Device Manager launchpad, select Security Updates > Update Web Categories.
1.
This option updates the security device predefined categories from the SurfControl
CPA server.
You must perform this step before updating the categories on the NSM management
system. When the Select Devices dialog box appears, select the security device you
want to contact SurfControl.
In the Device Manager launchpad, select Security Updates >Update System
2.
Categories. This option updates the NSM management system predefined categories
from a security device.
You must perform this step after updating the predefined categories on the security
device.
This section describes other device management tasks that you can perform using the
NSM UI.
The following sections describe each management task:
Launching a Web UI for a Device on page 302
Launching a Telnet CLI Window on page 302
Rebooting Devices on page 302
Refreshing DNS Entries on page 303
Updating the Device Clock with an NTP Server on page 303
Setting the Root Administrator on a Device on page 304
Failing Over or Reverting Interfaces on page 305
Setting the RMA State on a Device on page 305
Upgrading the OS Version During an RMA-Activate Device Workflow on page 306
Troubleshooting a BGP Peer Session on a Device on page 306
Reactivating Wireless Connections on page 307
Finding Usages on page 307
Chapter 7: Managing Devices
301