Figure 38: Configuring Cluster Members For Paris Vsys Cluster - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Copyright © 2010, Juniper Networks, Inc.

Figure 38: Configuring Cluster Members for Paris Vsys Cluster

Add the first vsys device:
3.
a. Click the Add icon and select Vsys Device. The new vsys device dialog box appears.
b. Configure the root as the Paris Cluster device, select a color, and choose Model
Virtual System/Virtual System Cluster Device. Click Next to continue.
c. Configure the NSM and ScreenOS name as Paris V1 and select global as the domain.
Click Next to continue.
d. Configure the vrouter for the vsys by selecting Default Vrouter, and then click Next
to continue.
e. Click Finish to add the new vsys cluster device.
Add the second vsys cluster device:
4.
a. Click the Add icon and select Vsys Device. The new vsys device dialog box appears.
b. Configure the root as the Paris Cluster device, select a color, then select Model
Virtual System/Virtual System Cluster Device. Click Next to continue.
c. Configure the NSM and ScreenOS name as Paris V2 and select global as the domain.
Click Next to continue.
d. Configure the vrouter for the vsys as the Default Vrouter, and then click Next to
continue.
e. Click Finish to add the new vsys cluster device.
Chapter 4: Adding Devices
167