Table 52: Device Statistics Summary; Viewing Device Statistics - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
666
Table 51: Device Detail Status Items (continued)
Item Description
Active Sessions The number of active sessions on the security device.
Allocated The number of sessions originally allocated to the security device.
Sessions
Max Sessions The maximum number of sessions on the security device.
Failed Sessions The number of sessions that have failed on the security device.

Viewing Device Statistics

If a security device is running, you can access the Statistics view to see traffic, interface,
zone, and other system-related information on the device. To view statistics on a particular
security device, right-click the security device in either the Device Monitor or the Device
Manager and select View Statistics. The Device Statistics Summary appears in a new
window.
NOTE: The information in the Device Statistics window appears slightly
different for firewall/VPN devices and IDP sensors.
Device Statistics Summary
The Device Statistics Summary displays the following details:
Details describing the security device or virtual system, such as serial number and IP
address, type, and firmware version.
Interface information
Device status
Time-related statistics such as last connect or reboot
Table 52 on page 666 details all the information you can view from the Device Statistics
Summary.

Table 52: Device Statistics Summary

Item
Device
Vsys
Version
Displays
Device: Displays the name, serial number, and IP address of the
security device.
Vsys: Displays the serial number of the security device.
The name of the virtual system (if applicable)
The security device's build, model, and operation mode (this is not
displayed in the Vsys view).
Copyright © 2010, Juniper Networks, Inc.