Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Devices with static IP addresses—In this CSV file, you define the device parameters
required to add and import the device configurations from all supported device types
except IDP.
Devices with dynamic IP addresses—In this CSV file, you define the device parameters
required to add all supported devices (except IDP) to the NSM system.
Undeployed ScreenOS devices—In this CSV file, you define the device parameters
required to add and model ScreenOS 5.x and later devices in the NSM system.
NOTE: You can model many ScreenOS devices, but you cannot activate
many devices except when using the Rapid Deployment process.
Juniper Networks provides CSV templates in Microsoft Excel format for each type of CSV
file. These templates are located in the utils subdirectory where you have stored the
program files for the UI client, for example:
C:\Program Files\Network and Security Manager\utils
For each CSV file, each row defines a single device's values for each parameter. For text
files, columns are separated by commas.
Devices with Static IP Addresses
For devices with static IP addresses, create a
23 on page 171.
Table 23: CSV File Information for Devices with Static IP Addresses
Field Name
Type
Name
String
Color
String
Device IP Address
String
Device Admin Name
String
Device Admin Password
String
Connection Protocol
String
Device Admin Port
Integer
file with the parameters shown in Table
.csv
Required
Acceptable Values
yes
yes
black, gray, blue, red, green, yellow,
cyan, magenta, orange, pink
yes
192.168.1.1, 10.1.1.10, 3.3.3.3
yes
<administrator>
yes
<password>
Note: All passwords handled by NSM
are case-sensitive.
yes
telnet, ssh_v1, ssh_v2.
no
23, 22, 4444, 7777
If null, uses 23 for Telnet and 22 for SSH
Chapter 4: Adding Devices
171
Advertisement
Table of Contents
