Table 67: Idp Device Detail Status Items - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
688
NOTE: If a sensor has never connected, the Device Detail Status and Device
Statistics views for the sensor are not available.
Viewing IDP Device Details
Double-click on any IDP sensor to view additional details on the sensor related to resource
usage. You can also right-click the sensor and select View Details.
NOTE: The information in the Details window appears slightly different for
firewall/VPN devices and IDP sensors. Details for IDP sensors include an
additional tab showing process status.
Table 67 on page 688 lists and describes the information that you can view for an IDP
sensor through the Device Detail Status:

Table 67: IDP Device Detail Status Items

Item Description
OS Version IDP firmware version running on the sensor.
Mode Current operation mode of the device.
CPU Idle Percentage of the time the CPU was idle.
CPU User Percentage of CPU utilization that occurred while executing at the user level.
CPU Kernel Percentage of CPU utilization that occurred while executing at the system
level.
CPU Usage Percentage of CPU utilization.
1 Min. Load One minute load average.
5 Min. Load Five minute load average.
15 Min. Load Fifteen minute load average.
Total Mem Total amount (in megabytes) of memory.
Used Mem Amount (in megabytes) of used memory.
Mem Usage Percentage of used memory.
Total Swap Total amount (in megabytes) of swap space.
Used Swap Amount (in megabytes) of used swap space.
Copyright © 2010, Juniper Networks, Inc.