Copyright © 2010, Juniper Networks, Inc.
Figure 108: Filter Summary Dialog Box
NSM applies the filter to all log entries and displays only the log entries that match the
specified Log Viewer columns.
To clear a Log Viewer column that was selected for filtering log entries:
Select View>Filter Summary.
1.
The Filter Summary dialog box is displayed.
To clear a single column: Clear the column check box that you do not want to use
2.
for filtering log entries, then click OK .
To remove all columns: Click the Clear All button.
Chapter 19: Logging
775
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 and is the answer not in the manual?
Questions and answers