Table of Contents
Advertisement
Network and Security Manager Administration Guide
NETBIOS:NBNS:SHORT_MSG
NETBIOS:NBNS:TYPE_UNKNOWN
P2P:AUDIT:GNUTELLA-BYE-TTL
P2P:AUDIT:GNUTELLA-EOL
P2P:AUDIT:GNUTELLA-HDR-ATRB
P2P:AUDIT:GNUTELLA-HTTP-GET
P2P:AUDIT:GNUTELLA-LINE
P2P:AUDIT:GNUTELLA-MESSAGE
P2P:AUDIT:GNUTELLA-MSG
P2P:AUDIT:GNUTELLA-OK-RESP
P2P:AUDIT:GNUTELLA-PING-LEN
P2P:AUDIT:GNUTELLA-PONG-LEN
P2P:AUDIT:GNUTELLA-PUSH-LEN
P2P:AUDIT:GNUTELLA-QUERY
P2P:AUDIT:GNUTELLA-RTABLE-UPD
914
This protocol anomaly is a Netbios name message that is
shorter than expected.
This protocol anomaly is an invalid value in 1) the
QUESTION_TYPE field in the question section or 2) the
RR_TYPE field in the resource record header.
This protocol anomaly is a Gnutella BYE message that does
not contain a TTL of 1 and a HOPS of 0.
This protocol anomaly is a Gnutella message that does not
use the end-of-line (EOL) terminator characters <CR><LF>.
This protocol anomaly is a Gnutella message with a header
line that does not have a value for an attribute; a blank space
exists after the attribute colon.
This protocol anomaly is a Gnutella GET command that
does not use the expected syntax. Correct syntax is: GET
/get/<File Index>/<File Name> HTTP/1.1<CR><LF>.
This protocol anomaly is a Gnutella message with a line
length that exceeds the user-defined maximum number of
bytes. The default line length is 2048.
This protocol anomaly is a Gnutella message with a payload
type that is not defined in the Gnutella RFC.
This protocol anomaly is a Gnutella message with a payload
length that exceeds 4096 bytes.
This protocol anomaly is a Gnutella client response that
does not use the expected syntax. Correct syntax for Gnutella
0.6 is: GNUTELLA/0.6 200 OK<CR><LF>.
This protocol anomaly is a Gnutella 0.4 PING message that
has a nonzero payload length.
This protocol anomaly is a Gnutella PONG message that
has an invalid payload length. Gnutella 0.4 PONG messages
should have exactly 14 bytes; Gnutella 0.6 PONG messages
should have a minimum of 14 bytes.
This protocol anomaly is a Gnutella PUSH message with a
payload length that is less than 26 bytes.
This protocol anomaly is a Gnutella QUERY message with
a payload length that exceeds the user-defined maximum
number of bytes. The default line length is 256.
This protocol anomaly is a Gnutella ROUTE_TABLE_UPDATE
message with a payload length of 0 bytes.
medium
sos5.1.0
high
sos5.1.0
info
sos5.1.0
info
sos5.1.0
info
sos5.1.0
info
sos5.1.0
info
sos5.1.0
info
sos5.1.0
info
sos5.1.0
info
sos5.1.0
info
sos5.1.0
info
sos5.1.0
info
sos5.1.0
info
sos5.1.0
info
sos5.1.0
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1
- Juniper STRM LOG MANAGEMENT 2008.2 - S 6-2008