Table of Contents
Advertisement
Network and Security Manager Administration Guide
194
For Secure Access, Infranet Controller, and Junos devices, select the Configuration
3.
tab.
The device configuration tree appears in the left pane.
In the device navigation tree, select a function heading to see device parameters, and
4.
then select the configuration parameter you want to configure.
Make your changes to the device configuration, then choose one of the following:
5.
Click OK to save your changes and close the device configuration.
Click Apply to save your changes and continue making changes.
Click Cancel to discard all changes and close the device configuration.
To reset a device feature to its default value, right-click on the feature name in the device
editor and select Revert to template/default value.
A brief overview of each device family follows. For details, see the referenced
device-specific documentation.
Configuring ScreenOS/IDP Device Features
The device configuration tree for a ScreenOS or IDP device looks similar to the example
in Figure 42 on page 194.
Figure 42: ScreenOS Device Object Configuration Data
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
