Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
a. For Name, enter UNIX Remote Access VPN.
b. Select Enable.
c. In Termination Point, select Untrust.
d. Click OK to save the VPN and return to VPN Manager. In VPN Manager, select the
UNIX Remote Access VPN.
Configure the policy-based members:
7.
a. In the main display area, select the Protected Resources link.
b. In the Protected Resources list, select the Chicago Corporate Trusted LAN, then
click OK to return to the main display area.
Configure the termination points of the VPN:
8.
a. Click the Termination Points link. The Termination Points dialog box appears.
b. Configure Chicago Corporate to use ethernet3 as the termination point (this is the
Untrust interface), then click OK to return to the main display area.
Configure the remote users for the VPN:
9.
a. In the Remote Users section, click the Users link. The Remote User dialog box
appears.
b. Select the user "wparker" , then click Save to save your configuration changes to
the VPN.
Configure the VPN gateway:
10.
a. Click the Gateway Parameters link. The Properties tab appears. Leave all defaults
and click the Security tab.
b. In the Security tab, enter the preshared key value (h1p8A24nG5), then click
Generate Key.
c. For Phase 1 Proposals, select User-Defined, then click the Add/Edit icon to add
the pre-g2-3des-sha proposal.
Chapter 12: Configuring VPNs
593
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1
- Juniper STRM LOG MANAGEMENT 2008.2 - S 6-2008