Table of Contents
Advertisement
Network and Security Manager Administration Guide
Table 16: Predefined NSM Administrator Activities (continued)
Function
Infranet Controller Operations
Inventory
Investigative Log Reports
IP Pools
Job Status Logs
Jobs
Large Binary Objects
License
Logged in Admins
Multicast Rulebases
NAT Objects and subtree
82
Task
Description
N/A
This activity enables an administrator to configure a security device to
interoperate with an Infranet Controller.
View
Allows an administrator to view the hardware, software, and license
inventories.
View
The Log Investigator generates investigative log reports based on selected
criteria. This activity enables an administrator to view those log reports.
Create
This activity allows an administrator to manage IP pools. An IP pool object
contains IP ranges (a range of IP addresses within the same subnet). You
Delete
use IP Pool objects to assign IP addresses to L2TP users in L2TP VPNs
or local users on a specific device.
Edit
View
Purge
Each time NSM performs a task for which a job is created, Job Manager
creates a job status log. This activity enables an administrator to purge
those logs from the management system.
View
A job is a task that NSM performs, such as updating a device, generating
a device certificate request, or importing a device.
Cancel active
Create
Enables an administrator to manage large binary data files. These files
permit the efficient handling of large amounts of configuration data often
Delete
associated with Secure Access and Infranet Controlled devices.
Edit
View
Install
This activity allows an administrator to install or view a new NSM license.
View
View
This activity allows an administrator to view the administrators logged
into NSM.
Create/Edit
The multicast rulebase in a security policy contains multicast rules, which
can handle IGMP and PIM-SM traffic. These activities enable an
View
administrator to control or view rules in the multicast rulebase.
Create
Allows an administrator to manage NAT objects, which allow multiple
devices to share a single object.
Delete
Edit
View
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1
- Juniper STRM LOG MANAGEMENT 2008.2 - S 6-2008