Device Polling Intervals - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Device Polling Intervals

Copyright © 2010, Juniper Networks, Inc.
Table 49: Device Status Information (continued)
Column Description
H/W Inventory Displays the inventory status for hardware on the device:
Status
In Sync: The inventory information in the NSM database is synchronized
with the information on the device.
Out Of Sync: The inventory information in the NSM database is not
synchronized with the information on the device.
N/A: The connected device is a ScreenOS or IDP device, or the device is
not connected and imported.
S/W Inventory Displays the inventory status for software on the device:
Status
In Sync: The inventory information in the NSM database is synchronized
with the software on the device.
Out Of Sync: The inventory information in the NSM database is not
synchronized with the software on the device.
N/A: The connected device is a ScreenOS or IDP device, or the device is
not connected and imported.
License Inventory Displays the inventory status for software on the device:
Status
In Sync: The inventory information in the NSM database is synchronized
with the licenses on the device.
Out Of Sync: The inventory information in the NSM database is not
synchronized with the licenses on the device.
N/A: The connected device is a ScreenOS or IDP device, or the device is
not connected and imported.
First Connect The first time the device connected to the NSM Device Server.
Latest Connect The last time the device connected to the NSM Device Server.
Latest Disconnect The last time the device disconnected from the NSM Device Server.
NSM retrieves device statistics from the physical device. The device polling interval
determines the number of seconds the Device Server waits before polling for new
statistics.
To configure or view the device polling intervals, double-click the Server Manager >
Servers node, then select the Device Server and click the Edit icon. The Device Server
dialog box is displayed. Use the Device Polling tab to edit the intervals to meet your
monitoring requirements:
Chapter 17: Realtime Monitoring
663